Race Car Sheet Metal
Custom Sheet Metal Race Cars & Trucks
(click on pictures for full size preview)
No job is too big and I am open for suggestions on custom jobs that might have a special application. All metal can be powder coated or
chromed (even the aluminum can be chromed) for an additional price.
Wings
(and Not the kind you get @ Hooters)
'65  Corvette Street / Strip Car back half
These are shots under the
rear of the car, thought I
would label where the battery
goes, it's hidden under the
removable panel
1966 Chevelle
Jeff Shawvers  twin turbo Camaro with one of a
kind custom 3D flames on the spill plates
Corvette
Camaro
Nova with one of a kind 3D letters on the wing, custom
initial panel between tubs (w/flames of course), and my
patented dual 20# Nitrous bottle holder.
Back Half Camaro with a wing with adjustable wicker
Another Chevelle interior that I did, the chassis was done by
my friend Gene Abbott in Gainesville who has been racing  
drag cars since I was in diapers
Before
After
I also made these tricked out covers for the large hole cutouts from the wing struts poking
through the body
These are just a few of the Dragsters
that I have built over the years, All the
sheet metal, fiber-glassing, My own
Custom design Wings,Canards etc.
This car was intended to be just another sheet metal job but when it got to me the list started. Chassis mods to the front end (all new) and various other
modifications. The owners gave me free reign on the sheet metal work, so I opted for the tribal theme with a few flames here and there. These are some of the
chassis modifications that I can perform if needed on your race car or truck.
'95 Beretta
Brian Markiewicz Yellow
Flamed Mustang door panels
New dash for this race car, I just can't get enough of those flames !!
In my shop, I can do single tin jobs like you see here, so if your tin
work is looking old and dated, bring it to me for a fresh newer look.
Below are the finished product of the above
pictures after the car was painted and motor put in
etc ......
This corvette has custom 3D flames in the floorboards
and tunnel which were later painted in a process to
make them look like carbon fiber.
Nice new door panels for Bill Futch's
re-vamped twin turbo Camaro. More
pictures coming soon....
Must be a kazillion Camaros out there!! Here is another front half.
352-427-5728
email troy@troys3ddesignart.com
Another Camaro Sheet Metal job with the
basic Bead Rolls
3D Phoenix  & Flame Designs
CHASSIS MODIFICATIONS
IN ADDITION TO ALL OF THE SHEET METAL FARICATION I DO I ALSO FABRICATE CHASSIS AS WELL AS SEEN HERE WITH NEW "X" BRACES ON BOTH SIDES
FOR S.F.I. SPECIFICATIONS.  IF YOU NEED SOME BARS ADDED OR EVEN A FULL MAKE-OVER LIKE THE FRONT END BELOW ON THE BERETTA CALL ME.
A Lenco transmission tunnel I made for a  
Beretta owned by Tony Christian
Brand New SFI spec
floorboard
A big thank you Danny Green for letting me do your modifications!  Good luck racing this year!
Custom Chevy S-10 Interior Makeover
No matter who built your race car or truck, I will gladly re-furbish your old interior and it will
set your race car apart from all the others. I would like to thank Casey Vickers From Georgia
for letting me give his Jerry Haas Pro Stock truck a cool new interior. Call today to get you
race car in my shop while you are down for the winter months, weather you need one panel or the
whole car done, space is very limited so call today. Thank you again Mark Roberts for getting
me some really cool business!!
Nova Full race interior
Here is another example of a full drag car sheet metal job. Nothing too fancy in here but the tin work
itself, otherwise nothing in 3D. I generally do not put cars together with pre-bought "made to fit" sheet
metal, but this was a friend of a friends car and I used what I could to make the interior out of his
store bought panels. I utilized them where I could and this is the result, so if I fabricate the sheet
metal on your car I will use my own sheet metal, the pre-made stuff never fits right.
'63 CORVETTE
Custom '63 Corvette Mods
The custom inside sill area was strategically fit then had
the "Carbon Illusions" look put on it.
Another Custom wing that I fabricated
Hey look!! My new "PUSH
OFF" Handle.
Some more custom Machining for the Wheelie bar plates
and the Vavle Bracket.
NEW
Wing, Struts &
3D Spill plates
Body kit had a rather large
single chute mount on it that
I had to remove for the
"canister" chute releases, so
I cut....then covered
More Exterior & Interior Shots, 3D
Tribal everywhere!!
Windows and door panels
Some rear sheet metal shots, and
even more tribal designs
I also made this set of ramp extensions for Mark
Roberts to help get his awesome Vette in and out of
the car trailer .
First ever (that I know of) Dual chute
single cable assembly That I custom
made for this car using a cantilever
system to make it work
correctly...neat stuff!!
'68 CAMARO:
NOTHING BUT FLAMES
I had fun with this car, this was my first time for making crossover flames, I think it turned out pretty cool, I have very good prices
and I can put just about any theme you want in your car, just call or e-mail me and I'll get you hooked up!  Completed 7-14-2008
I'd like to give a special thanks to Mark Roberts from MBR Motorsports
for previously owning this awesome Corvette and letting me work on it when
he owned it and for also doing the modifications you see here now having
new owners. I think Mark owned just about every Corvette on this
page...lol...seriously though, look for these cars at your local track.
Another Custom Corvette wing that I fabricated